MESTEK Pinless Wood Moisture Meter - Non-Destructive Moisture Detector for Drywall, Wood & Masonry | Backlit LCD Display with Alarm | 20-40mm Depth Detection | Ideal for Home Inspection, Flooring & Construction Projects

Product Description

The moisture is measured by the high frequency wave from the spherical probe. No damaged material is inserted. The moisture indication is absolutely non-destructive to ensure the original state of the material. The spherical probe at the front end can easily and nondestructive detect the near surface moisture in various materials, and quickly locate the moisture distribution in the wall, floor or ceiling without affecting the quality of the wall. 100% non-destructive measurementMeasure the moisture inside the objectCalibration with one buttonHigh definition large screen in colorMax/min and data retention functionAcoustic alarm, the alarm range is adjustableLow power prompt and automatic shutdown function 100% Non-Destructive Moisture Meter Absolute non-destructive measurement The MESTEK 700B is ideally suited for the rapid non-destructive determination of moisture distributions in near-surface areas up to 20-40 cm, where no electrodes or probes have to be inserted into the material to be measured. Color HD display Digital display and analog display bar, intuitive display, very easy to understand. Use "WET", "DRY" and "RISK" to warn and inform dry points, transition areas and wet points on the wall. Non-destructive Measurement The MESTEK pinless moisture meter allows users to evaluate the moisture content of various materials without penetrating the surface, quickly and non-destructively indicating the moisture distribution of the surface of the measured object at a depth of 20-40mm, the spherical probe can measure small spaces and cover a wide range . User-friendly Design Makes Operation More Convenient Automatic shutdown The hygrometer automatically turns off within 30 minutes after it is turned on. To cancel this function, press and hold the MEAS button and then press the power on button when the machine is off. Simple calibration Press the MEAS button to complete the calibration within three seconds and enter the measurement state. Press the MEAS button to switch to the data storage and save the current measured value. Portable and light The appearance is just the size of the palm, which can be used very well. The weight is about 200g, which is also very portable. It is very suitable to carry it in your pocket or to collect it in your tool bag! Technical specifications Measurement range 0-100 Measured depth 20-40mm Range of RISK limit value 0-50 Range of WET limit value 51-100 Automatic shut-down 30 minutes Display Color screen Battery 1.5V x 3 AAA (included) Operation current About 30mA Operation temperature 0-40 ℃ Operation humidity 0%-70%RH Storage environment -10~50℃(5%-95%RH) Size 195*73*33mm Weight 190g(excluding batteries) Easy to use Step 1. Power on; Step 2. Align the probe with the calibration object; Step 3. Press the MEAS button; Step 4. Wait for 3 seconds and measure. Attention When measuring, try placing your hands on the lower part of the device to avoid the effects of hand moisture on the measurement results.With a continuous measurement, the position in which the hygrometer is held cannot be changed, which affects the measurement results.Please do not compare the measurement results with those of other similar products. The calculation method of each non-contact moisture meter is different.