Delivery & Return:Free shipping on all orders over $50
Estimated Delivery:7-15 days international
People:28 people viewing this product right now!
Easy Returns:Enjoy hassle-free returns within 30 days!
Payment:Secure checkout
SKU:59436484
Feature:1. The fuel injection mode is specifically set up for quick and easy injector circuit diagnosis. Quickly connect to the circuit and KM50 will display all required injector test information. To reset the maximum and minimum values, press the mode button twice. In this mode, if a valid injection pulse is not detected, a bar symbol will be displayed.2. Frequency mode. Press the mode button to enter the menu, short press the down button to place the cursor in the frequency mode, and then short press the mode button to enter the frequency waveform display mode. The LCD display will display the minimum frequency and maximum frequency, and display the signal waveform in real time.3. Duty cycle mode. Press the mode button to enter the menu, then short press the down button to place the cursor in the duty cycle mode, and then press the mode button to switch to the waveform display. The LCD display will display the minimum duty cycle, maximum duty cycle, and real-time display of signal waveforms.4. DC voltage mode. The DC mode is used to test the DC (DC) voltage. Voltage testing is as easy as touching the probe tip with the circuit and reading the display. DC mode is a mode in which KM50 can power the battery or ground by pressing the rocker switch.5. Resistance test mode. The probe contacts one end of the measured resistance, and the auxiliary ground wire is connected to the other end of the measured resistance. The LCD will display the resistance between the needle tip and the auxiliary ground wire. When the resistance value is less than 30Ω, the instrument buzzer will alarm and the green LED will light up. This function can be used for continuity testing.How to
Duty cycle mode. Press the mode button to enter the menu, then short press the down button to place the cursor in the duty cycle mode, and then press the mode button to switch to the waveform display. The LCD display will display the minimum duty cycle, maximum duty cycle, and real-time display of signal waveforms.
Frequency mode. Press the mode button to enter the menu, short press the down button to place the cursor in the frequency mode, and then short press the mode button to enter the frequency waveform display mode. The LCD display will display the minimum frequency and maximum frequency, and display the signal waveform in real time.
DC voltage mode. The DC mode is used to test the DC (DC) voltage. Voltage testing is as easy as touching the probe tip with the circuit and reading the display. DC mode is a mode in which KM50 can power the battery or ground by pressing the rocker switch.
Connect the tip of the probe to the positive terminal of the diode and the auxiliary ground wire to the negative terminal of the diode. The screen will display a forward voltage drop, indicating a forward bias. If you swap the probe tip with the auxiliary ground wire, the screen will not display the voltage, which indicates that the
The fuel injection mode is specifically set up for quick and easy injector circuit diagnosis. Quickly connect to the circuit and KM50 will display all required injector test information. To reset the maximum and minimum values, press the mode button twice. In this mode, if a valid injection pulse is not detected, a bar symbol will be displayed.